|
TABLE LOOMS from Schacht, Le Clerc, Louet, Ashford, & Dundas
 |
SCHACHT TABLE LOOMS
Schacht Table Looms are crafted of the finest
hard maple & designed to withstand heavy use. Many schools use Schacht Looms for just
this reason. Fine toothed nylon ratchets on
both the warp and cloth beams allow precise tension control. Front mounted harness levers are easy to see & easy to reach with either
hand. The action is smooth and quiet. The looms are finely sanded & finished with
Danish oil. Looms come with your choice of
reeds (6,8,10,12, or 15 dent), flat steel heddles, 2 apron rods, and 3 lease sticks. (Minimal assembly required)
Available in 3 weaving widths - 15", 20", & 25"
OPTIONAL SCHACHT FLOOR STAND -
Schacht's NEW
X Frame Floor Stand holds your Schacht Table Loom at the ideal height when you are sitting in a standard chair. Installation is simple - just fit the holes in the base of the loom onto pins in the stand. To remove, simply lift the loom off the stand. The Floor Stand will fit older model table looms by drilling holes in the bottom of the Table Loom using the drill guide provided.
SCHACHT TABLE LOOMS - (Finished and Partially Assembled) 02-15-08
Prices shown are suggested retail ***CALL for SPECIALS
SCTL1001 15" weave width /4 Harness 533.00
SCTL1011 15" weave width / 8 Harness 726.00
SCTL1002 20" weave width / 4 Harness 640.00
SCTL1012 20" weave width / 8 Harness 833.00
SCTL1003 25" weave width / 4 Harness 747.00
SCTL1013 25" weave width / 8 Harness 940.00
SCTL1105 Folding Floor Stand for 15" 180.00
SCTL1106 Folding Floor Stand for 20" 191.00
SCTL1107 Folding Floor Stand for 25" 202.00
SCTL1215 8H DoubleBack Beam for 15" loom 150.00
SCTL1220 8H DoubleBack Beam for 20" loom 155.00
SCTL1225 8H DoubleBack Beam for 25" loom 160.00
|
 |
LECLERC VOYAGEUR FOLDING LOOM (11-22-07)
-CALL FOR MORE INFORMATION
LC21200009 9 1/2" 8H Model with Bag- 760.00
LC-5451-0416 15 3/4" 4 H Model w/ Bag - 675.00
LC2120-0016 15 3/4" 8H Model with Bag- 760.00
LC2120-1216 15 3/4" 12 H Model with Bag - 970.00
LC6432-1001 Double Warp Beam 15 3/4" - 230.00
LC2120-0916 Swinging Beater - 60.00
LC6312-2000 Folding Table for Dorothy or 15 3/4" Voyageur - 189.00
24" Voyageur Loom
LC2124-0424 24" 4 H Model (no bag) - 840.00
LC2124-0084 24" 8 H Model (no bag) - 920.00
LC2124-0424 24" 12 H Model (no bag) - 1,090.00
LC2124-1624 24" 16 H Model (no bag) - 1,210.00
LC6432-1100 24" Double Warp Beam - 235.00
LC6313-2024 24" Stand w/ Side Shelves - 280.00
9 1/2" can be carried on plane, weighs only
16 lbs.
15 3/4" model weighs only 20.5 lbs. and can be checked in at Baggage Counter. The 9.5" model comes with 300 Inserted Eye Heddles and the 15.75" model comes with 400 Inserted Eye Heddles. Both looms have 8 Shafts with front levers, Stainless Steel Reed and custom made Bag with pouch for tools as well as a specially designed 1" profile Cherry Shuttle, Reed and Heddle Hook, 2 Lease Sticks, 2 Beam Sticks, the newly designed Warp and Cloth Roll Lashing system, 2 Screwdrivers, transfer Heddle Bars and the book "Warp & Weave" by Robert LeClerc. Folds flat for travel and 9 1/5" and 15 3/4" come with carry bag. Texsolv Heddles can be substituted at no extra charge. Swinging Beater can be substituted at no extra charge. 9.5" and 15.75" w ill fit on optional folding Dorothy Stand.
24" 16 Shaft Computer- Dobby model also
available-inquire.
CALL FOR MORE INFO- LECLERC TABLE LOOMS
|
 |
LECLERC DOROTHY LOOM 11/22/07
CALL FOR MORE INFORMATION
LC2110-0000 15 3/4" - 4 Harness 580.00
LC2111-1000 15 3/4" - 8 Harness 740.00
LC2112-0000 15 3/4" - 12 Harness 935.00
LC6394 Extra 4 Harn. Section 15 3/4" 188.00
LC6392 Dorothy
Frame 8 to 12 Shaft 75.00
LC0022 Dorothy Second Warp Beam 230.00
LC2110-1000 Substitute Inserted Eye of Texsolv Heddles add 36.00
LC6312-2000 Folding Stand for 15 3/4"loom 189.00
LC2410-0000 24"
- 4 Harness 695.00
LC2411-0008 24" - 8 Harness 860.00
LC6396 24" Dorothy 4 Shaft Section(right or left 225.00
LC1100 Second
Warp Beam-24" 235.00
LC2400 Sectional Warp Beam -24" 235.00
LC1024 Substitute Ins. Eye Heddles 49.00
LC2000 Stand w/6Treadles for 24"4H with side shelves 385.00
LC2008 Stand WithoutTreadles with side shelves 280.00
|
 |
ASHFORD TABLE LOOMS (09/15/07)
Ashford Table Looms are available in 3 weaving
widths : 16", 24", & 32". Levers
are located on front of castle . Loom folds flat for storage. Comes with 10 dent Reed, Texsolv Heddles,
Threading Hook, Warp & Cross Sticks, 2 Shuttles and Weaving Guide. 4 Harnesses or 8 Harnesses
Also available: kit to add 4 Harnesses to 4 H
model
Partially assembled and finished New Zealand
Silver Birch. 16" Weighs 15.5 lbs. Folded depth 7"
16" 4
Harness Loom comes with 160 Heddles, others with 320 Heddles.
OPTIONAL LOOM STAND WITH 4 TREADLE KIT
STAND AND TREADLE KIT FOLD FLAT.
NOT AVAILABLE WITH MORE THAN 4 TREADLES
ASHFORD FOLDING TABLE LOOMS (09/15/07)
Finished, & Partly Assembled - FOLDS ! SALE PRICES!!
A0526 16" wide, 4 harness - 520.00
A0527 16" wide, 8 harness - 595.00
A0524 24" wide, 4 harness - 575.00
A0525 24" wide, 8 harness - 665.00 A0552 24" wide, 16 harness - 1,050.00
A0522 32" wide, 4 harness - 640.00
A0523 32" wide, 8 harness - 730.00
A0536 16" + 4 Later Kit - 170.00
A0537 24" + 4 Later Kit - 177.50
A0538 32" + 4 Later Kit - 185.00
A0528 16" Stand w/ 4 Treadles - 280.00
A0529 24" Stand w/ 4 Treadles - 295.00
A0530 32" Stand w/ 4 Treadles - 310.00
A0555 24" Stand Kit for 16 harness table loom - 340.00
A0531 16" 2nd Back Beam - 87.50
A0532 24" 2nd Back Beam - 109.00
A0533 32" 2nd Back Beam - 125.00
|
 |
LOUET
KOMBO LOOM - 16" or 28"
The Louet Kombo is a convertable loom, start
with the Rigid Heddle, add the High Castle and you have a 4 Harness Loom, 4
extra Harnesses can be added at any time to convert to an 8 Harness Loom. You can also start with a 4 Harness Loom. A Floor
Stand is available for the 28" loom as are Treadle Kits for 4 or 8 Harnesses. (The
16" Loom uses the Klik Stand and no Treadles are available)
Louet's Rigid Heddle comes with Lease sticks, 2
Stick Shuttles, and instructions. Made of lacquered beech and comes unassembled.
16" weighs 12 lb., 28" weighs 16
lb.
The Kombo Conversion Kit converts the Rigid
Heddle to a Table Loom. It consists of Castle, 4 Harnesses, 200 Texsolv Heddles, Beater
and 10 dent Stainless Steel Reed.
The Kombo Table
Loom heights are a comfortable 5" above the table top. The loom can be folded to a
compact 34" x 31" x 7.5" with the warp on or off. The 4 Harness Table Looms come complete with 200 Texsolv Heddles for the 16"
model and 400 Texsolv Heddles for the 28" model.
Both come with a 10 dent Stainless Steel Reed, built in Raddle, 2 Stick
Shuttles, 16 Warp Sticks, Tools and Instructions. Unassembled.
16" weighs 26 lb., and
28"weighs 38 lb.
LOUET TABLE LOOM- Sale Prices
(Finished,Unassembled) ( 10-15-07)
LT3101002 W-30 Folding Table Loom 505.00
LT3.051001 Klik 16" 4 H Loom 485.00
LT3.051051 4 H Ext, for 16" Klik 85.00
LT3.101001 Kombo 40/4 16" 4 H. Loom 685.00
LT3.101051 Kombo 40/8 Extra 4 H Kit 94.00
LT3.051151 Klik/Kombo40 Floor Stand 185.00
LT3.051201 Klik/Kombo40 2nd Warp Beam 101.00
LT3.102001 Kombo 70/4 28" 4H Loom 825.00
LT3.102051 Kombo 70/8 Extra 4H Kit 125.00
LT3.102151 Kombo70FloorStand 230.00
LT3.102201 Kombo 70 2nd Warp Beam 125.00
LT3903 100 Texsolv Heddles/Table Lm 19.50
LT3.152250 Bench 255.00
|
Dundas Maple Table Loom Click on Picture to see larger picture
Dundas Cherry Table Loom Click on Picture to see larger picture Cherry available by special order -higher prices
|
Dundas Table Looms are multi-harness looms, designed with both the beginning and expert weaver in mind. Finely crafted from eastern maple, our table looms are fully collapsible. This compactness allows for easy transport to workshops and classes. Our looms come fully equipped with a choice of either flat metal or Texsolv nylon string heddles.
Table Looms are:
- available in 18" or 25" weaving widths
- available in four, eight and 12 and 16 harnesses
- shed action is spring loaded, making the lever action smooth, quiet
and positive
- shipped fully assembled and ready to use with heddles installed
- standard equipment includes two lease sticks and a stick shuttle
DUNDAS TABLE LOOMS - 2006 Unfinished Maple or Cherry
MAPLE
DN1804 18" - Maple 4 Harness 535.00
DN1808 18" - Maple 8 Harness 665.00
DN1812 18" - Maple 12 Harness 795.00
DN1816 18" - Maple 16 Harness 915.00
DN2504 25" - Maple 4 Harness 595.00
DN2508 25" - Maple 8 Harness 715.00
DN2512 25" - Maple 12 Harness 850.00
DN2516 25" - Maple 16 Harness 995.00
CHERRY
DN1804-C 18" - Cherry 4 Harness 615.00
DN1808-C 18" - Cherry 8 Harness 755.00
DN1812-C 18" - Cherry 12 Harness 895.00
DN1816-C 18" - Cherry 16 Harness 1,025.00
DN2504-C 25" - Cherry 4 Harness 675.00
DN2508-C 25" - Cherry 8 Harness 805.00
DN2512-C 25" - Cherry 12 Harness 950.00
DN2516-C 25" - Cherry 16 Harness 1,025.00
LEGS ONLY
DN1118 18" - Maple - Legs only 165.00
Cherry - Legs only 175.00
DN1125 25" - Maple - Legs only 165.00
Cherry - Legs only 175.00
Treadle Stands/ 4 Harness- 4 Treadle
DN1218 18" - Maple - 4Treadles 275.00 Cherry - 4 Treadles 330.00
DN1225 25" - Maple - 4Treadles 275.00
Cherry - 4 Treadles 330.00
|
|
SCHACHT WOLF LOOMS, SCHACHT FLOOR LOOMS, CRANBROOK, NORWOOD, HARRISVILLE, LE CLERC, LOUET, GLIMAKRA, RUG LOOMS, TAPESTRY LOOMS, TABLE LOOMS, SMALL LOOMS, KIDS PAGE, TRIANGLE LOOMS ,WEAVETTES,YARNS, WEAVING TOOLS, WEAVING BOOKS,
USED LOOMS FOR SALE
|
TOP of Page
|