|
SCHACHT WINDING STATION 264.95 with *Free shipping |
|
LE CLERC HOLDS ALL - 294.00
|
 |
SCHACHT WARPING PEGS Warping Pegs are the simplest and most portable warp-measuring tools. They clamp to a table or counter; the single peg placed at one end of the warp length and the pair of pegs placed at the other end, spread as far apart as the warp is long. Use with your own "C" clamps. 20.50 SALE - 19.50 |
 14
Yd
|
SCHACHT 4 1/2 or 14 YARD WARPING BOARD Warping Boards are the most commonly used measuring devices. Schacht warping boards are available in two sizes: the 14 yard warping board is one yard across and the 4 1/2 yard warping board measures a half yard across. To withstand the strain of threads under tension, they tenon their hardwood dowels and press them securely into the frame.
14 Yd- 39" x 31" x 6" - 7 lbs. 113.00 SALE - 105.00 4 1/2 Yd- 20" x 20" x 6" - 3 1/2 lbs. 73.00 SALE - 69.95 |
 Schacht Vertical Warping Mill
 Schacht Horizontal Warping Mill
|
SCHACHT WARPING MILLS Warping Mills are ideal for long warps. Instead of going back and forth with your arm to measure threads like on a warping board, the warping mill goes around and around which is quicker and less tiring. Schacht warping mills come in two models: the vertical warping mill sits on a table, and the horizontal warping mill which may be used either on a table or on the floor. Both mills have a two yard circumference, will hold up to 18 yards of warp, and can be folded up for storage.
Vertical Warping Mill 25" x 36" x 25" - 14 lbs. 330.00 with *Free shipping
Horizontal Warping Mill 36" x 34" x 25" - 18 lbs.355.00 with *Free shipping |
 |
LE CLERC TABLE MODEL WARPING MILL
22 Yard - 2 yards per turn
Height - 38" Width - 26 1/4"
#6340-2000 262.00 CALL |
| |
LE CLERC FLOOR MODEL WARPING MILL
50 Yard - 4 yards per turn
Height 68" - Width 59"
$6340-4000 - 712.00 ppd. CALL |
|
|
 |
LE CLERC BOBBIN OR CONE HOLDER with 8 pegs and 8 eyes as guides. For use with warping boards or vertical warping mills.
LC-6361-1000 call |
 |
SCHACHT SPOOL RACK
Our spool rack is essential for sectional warping. Ours will hold up to forty 4" spools and has a center post that pivots for easy loading and unloading. The center post locks into place during use. Even though the spool rack is generally used for sectional warping. It can be indispensable for other studio tasks as well: holding standard yarn tubes and bobbins or as a place to clamp a swift or ball winder. Our spools are made of cardboard and measure 4" wide with 3" flanges. 235.00 with *Free Shipping |
 |
LE CLERC SPOOL RACK can hold forty 4" (102 mm) spools. Built like a frame: 21" x 37" (53 cm x 94 cm) with two removable supports. The pins are fixed to a central post that can be turned when removing bobbins.
LC-6362-1000 $ 187.00.
OPTIONAL THREAD GUIDES FOR SPOOL RACK LC-6362-2000 $91.00
SPOOL RACK WITH STANDARD THREAD GUIDES LC-6362-3000 $ 262.00
OPTIONAL THREAD GUIDES FOR SPOOL RACK LC-with Pigtail Screws LC-6362-3000 177.00
SPOOL RACK with Thread Guide istalled and with pigtail screws LC-+6362-3002 = 345.00 |
 |
LE CLERC STUDIO SPOOL AND CONE RACK - This bobbin rack can hold 50 : 4" - diameter bobbins (or tubes) or 30 : 8" - diameter cones. Each thread is guided by a pig tail eye which makes the treading easier; there is an additional row of pig tail eyes so that all bobbins of all sections can be either unwound by the end or unrolled. The bobbin rack can be folded for storage. During the warping, it must be open to an angle which gives it stability and uniform tension in the threads.
LC-6362-9900 CALL |
 |
SCHACHT TENSION BOX Schacht's Tension Box features a mounting bracket that adjusts to fit all Schacht Looms: Wolf, Standard, or Cranbrook. It should be compatible with floor looms other than Schacht's, as well. Features include: two-sided sturdy construction with a reed at the back, an adjustable tension knob, a heddle to make the cross, and a swiveling reed at the front to adjust the feeding width of the warp. 279.95 with *Free Shipping |
 |
LE CLERC TENSION BOX is adjustable to fit any LeClerc floor loom. Also fits many other looms.
The tension box is used with the Sectional Warp Beam and is adjustable to fit any Leclerc floor loom. The tension is adjustable, and it gives uniform tension on all warp ends as they are wound from the spool rack to thc loom. Two open 12 threads per inch (4.8 / cm) combs allow easy threading and help guide threads into the proper section.
It can also be used with counter when filling bobbins, holding threads and giving number of meters or yards on bobbins.
NEW : 2 fix rollers, 2 adjustable rollers for better tension control.
6160-1000 155.00
|
 |
SCHACHT YARDAGE COUNTER Yardage counters are useful tools for those who warp sectionaly. As opposed to most counters which read in feet, Schacht's records yards (you can also request a meter counter). The counter will record up to 9999 yards and comes complete with a clamp. 169.95 with *Free Shipping |
| |
LE CLERC YARDAGE COUNTER - Records in feet. Fits on the
Le Clerc Tension Box. LC6160-6000 110.00 |
