|
SCHACHT WINDING STATION $225.00 |
|
LE CLERC HOLDS ALL $235.00 |
 |
SCHACHT
WARPING
PEGS
Warping Pegs are the simplest and
most portable warp-measuring tools. They clamp to a table
or counter; the single peg placed at one end of the warp length
and the pair of pegs placed at the other end, spread as far
apart as the warp is long. Use with your own "C"
clamps. $17.50
|
 |
AUTO REED HOOK is a
sley hook
that advances automatically across the reed, moving from one dent to the
next without being removed and reinserted. (You advance it by
gently pushing
it) $45.95
|
 14
Yd
|
SCHACHT
4 1/2 or 14 YARD WARPING BOARD
Warping Boards are the most commonly used measuring
devices. Schacht warping boards are available in two sizes:
the 14 yard warping board is one yard across and the 4 1/2 yard
warping board measures a half yard across. To withstand
the strain of threads under tension, they tenon their hardwood
dowels and press them securely into the frame.
14 Yd- 39" x 31"
x 6" - 7
lbs. $97.95 4 1/2 Yd- 20" x 20" x 6" - 3 1/2 lbs. $59.95
|
Schacht Vertical Warping Mill
Schacht Horizontal Warping Mill
|
SCHACHT
WARPING
MILLS Warping
Mills are ideal for long warps. Instead of going back and
forth with your arm to measure threads like on a warping board,
the warping mill goes around and around which is quicker and
less tiring. Schacht warping mills come in two models: the
vertical warping mill sits on a table, and the horizontal
warping mill which may be used either on a table or on the
floor. Both mills have a two yard circumference, will hold
up to 18 yards of warp, and can be folded up for storage.
Vertical Warping
Mill 25" x 36" x 25" - 14
lbs. $293.00
Horizontal Warping Mill 36" x 34" x 25" - 18 lbs. $314.00
|
 |
LE CLERC TABLE MODEL
WARPING MILL
22 Yard - 2 yards per turn
Height - 38" Width - 26 1/4"
#6340-2000
$ 235.00 |
| |
LE CLERC FLOOR MODEL
WARPING MILL
50 Yard - 4 yards per turn
Height 68" - Width 59"
$6340-4000 - $ 580.00 ppd. |
 |
SCHACHT
CONE
RACK
If you're tired of
cones falling over and ends twisting around each other, a cone
rack will save time and frustration. Once you have it,
you'll wonder how you ever got along without it. Holds up
to 12 cones. |
 |
LE CLERC BOBBIN OR CONE HOLDER with
8 pegs and 8 eyes as guides. For use with warping boards or vertical
warping mills.
LC-6361-1000 $105.00 |
 |
SCHACHT SPOOL
RACK
Our spool rack is
essential for sectional warping. Ours will hold up to
forty 4" spools and has a center post that pivots for easy
loading and unloading. The center post locks into place
during use. Even though the spool rack is generally used
for sectional warping. It can be indispensable for other
studio tasks as well: holding standard yarn tubes and bobbins or
as a place to clamp a swift or ball winder. Our spools are
made of cardboard and measure 4" wide with 3" flanges.
$199.00 |
 |
LE CLERC SPOOL RACK can hold forty 4" (102
mm) spools. Built like a frame: 21" x 37" (53 cm x
94 cm) with two removable supports. The pins are fixed to a
central post that can be turned when removing bobbins.
LC-6362-1000 $ 175.00.
OPTIONAL THREAD GUIDES FOR SPOOL RACK LC-6362-2000 $85.00
SPOOL RACK WITH THREAD
GUIDES
LC-6362-3000 $ 245.00 |
 |
LE CLERC STUDIO SPOOL AND CONE
RACK - This bobbin rack can hold 50 : 4" - diameter bobbins (or
tubes) or 30 : 8" - diameter cones. Each thread is guided
by a pig tail eye which makes the treading easier; there is an
additional row of pig tail eyes so that all bobbins of all
sections can be either unwound by the end or unrolled. The
bobbin rack can be folded for storage. During the warping, it
must be open to an angle which gives it stability and uniform
tension in the threads.
LC-6362-9900 $ 415.00 ppd. |
 |
SCHACHT
TENSION BOX
Schacht's Tension Box features a mounting bracket that adjusts
to fit all Schacht Looms: Wolf, Standard, or
Cranbrook.
It should be compatible with floor looms other than Schacht's, as
well. Features include: two-sided sturdy construction with
a reed at the back, an adjustable tension knob, a heddle to
make the cross, and a swiveling reed at the front to adjust the
feeding width of the warp.
$245.00 |
 |
LE CLERC
TENSION BOX is adjustable to fit any LeClerc floor loom.
Also fits many other looms.
The tension box is used with the
Sectional Warp Beam and is adjustable to fit any Leclerc floor loom. The
tension is adjustable, and it gives uniform tension on all warp ends as
they are wound from the spool rack to thc loom. Two open 12 threads per
inch (4.8 / cm) combs allow easy threading and help guide threads into
the proper section.
It can also be used with counter when filling bobbins, holding threads
and giving number of meters or yards on bobbins.
NEW 1998: 2 fix
rollers, 2 adjustable rollers for better tension control.
6160-1000
$125.00 |
 |
SCHACHT
YARDAGE
COUNTER
Yardage counters are useful tools for those who warp
sectionaly. As
opposed to most counters which read in feet, Schacht's records yards
(you can also request a meter counter). The counter will
record up to 9999 yards and comes complete with a clamp.
$159.00
|
| |
LE CLERC
YARDAGE COUNTER - Records in feet. Fits on the
Le Clerc Tension Box. LC-6160-6000 $ 103.00 |
